Main bar top kits in poplar oak cherry maple mahogany or walnut hardwood are perfect for the diy bar top.
Building a solid wood bar top.
Can achieve desired appearance using 4 5 or 6 plank and butt ends are end matched already.
Intriguing copper bar top.
You can build a butcher block style top with maple or teak.
Beautiful natural wood pattern.
Drink rails are typically 3 4 inch deep by 4 inches wide.
You can combine kits to create a planked bar top of any length by simply alternating the joints.
How the lighting can change a setup 35.
If you want a 1 1 2 inch thick top cut your planks to that width.
Home bar tops are usually between 12 to 16 inches wide.
Creative wood pattern bar top.
Exclusive bar top design the license plate collection.
Unique combination of colors and light 32.
Have you considered using wide plank flooring installed on plywood.
With the points made by the scratch awl as a guide use a pencil to scribe the elongated shape.
Available in 6 8 and 10 lengths.
Required materials for this project 2 x 4s 3 4 in.
The minimum bar top thickness is 1 3 4 inches utilizing a flat grain wood.
Mark the hole locations.
Kits include tongue groove planks.
Ends and edges can be built up with solid wood to make top look solid.
If the top is expected to shrink put the pilot hole near the outside end.
The depth of your planks will be their width once they are turned sideways and assembled with the side grains showing.
Commercial bar tops vary from 20 to 28 inches in width including a drink rail or trough on the server side of the bar.
Wine s perfect bar the wine cork collection 31.
If you anticipate the top is likely to expand locate the pilot hole near the inside end of the elongated hole.
Plywood bar molding base material beer tap kit construction adhesive drywall screws foam insulation hardwood trim metal drip tray wood glue.
Layup nail using flooring nailer and sanders.