Here s more info on adding a roll up shed door.
Building a 4 foot wide shed door.
Nail 2 nails through the siding and into the 2 4 s.
Glenn delivered the wood shed a very odd shape at 16 x 4 and extremely difficult to place on location given the small hill basketball pole in the way and unstable shape 4 width.
You have to be careful though to frame your shed properly to accept this type of shed door.
Lay the 2 4 s in a flat even surface next lay the siding on top of the 2 4 s.
Build a sandwiched door header by nailing a piece of scrap siding between two 2x4s.
Next cut boards to frame the top bottom and sides of your door then glue them in place using wood glue.
A 2 pieces of 1 4 74 1 2 1 piece of 1 4 60 1 piece of 1 4 57 door jambs.
You can still frame for a 3 or 4 foot door today but later on a wider door configuration may be more useful.
Matched perfectly a shed purchased several years before from sheds unlimited.
She s also included a detailed plans and list of the tools you ll need to complete the project.
The first item on our list of shed door ideas is from ana white.
Easelife 10 ft double door sliding barn door hardware kit heavy duty ultra hard sturdy easy install slide smoothly quietly fit double 30 wide door 10ft track double door kit 4 7 out of 5 stars 649 69 99 69.
She s given step by step instructions on how to build this super cute single shed door.
B 2 pieces of 5 8 grooved plywood 25 x74 1 2 door panels.
Build the shed door with the siding that was cut out earlier in the steps above.
This extra half inch makes the total width to 3 inches the same as the height of a 2 4.
Decide if you want a single or a double door.
To build a door for a shed start by cutting a piece of wood paneling or ti 11 siding to the size of the door opening minus 1 2 inch on each side.
Would go to sheds unlimited again and did.
In order to build double shed doors you needs the following.