This will be the back.
Build a pool pump cover.
Next measure how wide you need the cover to be.
Then purchase a faux rock cover.
Best swimming pool pump cover ideas you can make diy.
Most pool pumps are.
The pool pump enclosure has a cutout so the motor is still exposed to the outside to look cool as designed.
Our pool pump cover ideas have a patent design that encompasses a durable acoustic vinyl with a mass loaded vinyl combined with 3 8 closed cell acoustic dampening foam.
Cover the screw heads with exterior filler leave to dry then sand lightly with 120 grit paper.
For example if the pool was 60 feet long then use 6 pieces to cover the area from one end of the pool to the other end.
You want one piece to be used every 10 feet in spacing.
This will be the roof of your pool cover.
If your pool pump isn t against your house then a chest might look strange.
If you are handy with wood you can saw up your own pool filter screen to hide the pool pump or you can buy vinyl privacy walls at most home stores and garden centers.
Next measure how tall you need the pool pump cover to be and mark that spot too.
Apr 30 2016 a pool pump is a key piece of equipment for keeping your pool working properly and therefore it is essential to keep it secure and protected.
Now it looks like you have a natural rock peacefully resting in the middle of a beautiful garden.
The simplest way to hide your pool pump and filter is to put up a small wall or screen to block the view and the noise from the pump.
If yours is in the middle of your yard you can still camouflage it.
Create a garden around your pool pump.
Cut the pieces of 1 inch pvc pipe for the width of the pool.
Cut this out with your saw.
A pool pump is a key piece of equipment for keeping your pool working properly and therefore it is essential to keep it secure and protected.
It acts both as a sound absorber and resistor to any sound pollution.
Finish the timber components with two coats of exterior acrylic.
Most pool pumps are.
Apply metal primer to the galvanised roof followed by a metal paint.
Measure and cut your wood.
Secure the hinges and hang the door then add a padbolt.
You should have a large rectangular shape.