With the advent of led tubes as a drop in replacement for fluorescent tubes the return on investment for led conversion can be very appealing.
Can i replace a fluorescent tube with led.
Led light tubes are popular replacements for the long fluorescent light tubes as they can last much longer and don t contain toxic mercury.
Type a led t8 tubes.
However the differences between the two technologies can result in unexpected side effects.
But you must confirm the ballast compatibility.
In addition these fixtures don t contain mercury or any other chemicals that are harmful to human health.
The most popular batten sizes are 2ft 4ft 5ft and 6ft length.
The answer is there are three ways.
Most of these tubes are designed to simply fit into the fluorescent light fixtures you already have.
You can just remove the fluorescents install the leds and you re done.
With the ability to be either surface mounted or suspended from the ceiling led batten lights are a great alternative to the outdated costly fluorescent tube light.
Even though the initial replacement costs to choose tube led tubes will be higher you will see energy savings that will pay for those up front costs within 2 years in most cases.
A 4 lamp 4 foot fixture can go from what you have now about 7200 lumens in led terms or the equivalent of replacing a fixture that has four brand new fluorescent tubes with four 1800 lumen led tubes to nearly twice as bright about 12 000 lumens with four 3000 lumen led tubes depending on the lumen rating of your led replacement tube.
The fluorescent fixture can be reused with only some minor rewiring.
When you install an led light fixture to replace fluorescent tubes you get to enjoy a brighter better lighting environment as well as cut the electricity by 50 80.
The simple answer is yes you can put an led bulbs in a fluorescent fixture but you must work out which type of fluorescent tube and fixtures that you have for your lighting.
Here s the lowdown on each so you know which type of led t8 to use for your next project.
With t8 tubes it can be as simple as take the old tube out and put the new led in.